XADO Revitalizant EX120
for power steering booster and other hydraulic equ

▌XADO Revitalizant EX120

for power steering booster and other hydraulic equipment

The product is designed for restoration, repair and antiwear protection of power steering booster and other hydraulic equipment.

During treatment of hydraulic system assemblies it forms a protective ceramic-metal coating on parts’ surfaces of pumping, execution units and distributors (slide valves).

It results in restoration of performance parameters of hydraulic equipment.



• Eliminates pump howling caused by wear and tear.

• Reduces the steering force.

• Increases operation accuracy of the power steering within just 50–100 km (30–60 miles) after the application.

• Reduces noise and vibration of the hydraulic pump.

• Protects parts from wear in case of a low oil level.



Treatment of assemblies with hydraulic system capacity of 1–2 L.

1. Introduce the contents of the syringe * in the fluid, which is warmed up to the operating temperature, in the tank of a power steering pump.

2. After the revitalizant is applied and the engine is turned on, wait 2–3 minutes and turn the steering wheel for 5 minutes.

3. Revitalization is considered complete after the mechanism has been in operation for 50 hours (or 1,500 km or 950 miles of run).



  Hydraulic system capacity (L) 1– 2 2– 5 5– 8
  Quantity of 8 ml syringes, ml 1 2 3
  Treatment pattern single-stage

* It is recommended preliminary to dissolve the contents of the syringe in a small amount (~50 ml) of used hydraulic fluid. If the fluid in the tank of a power steering pump is contaminated (opaque or has changed its initial color etc.), it is recommended to change hydraulic fluid before application.



A typical sign of beginning of the revitalization process is improvement in operation of the steering mechanism (reduction of the steering force

and noise, operation accuracy) starting from the first kilometers/miles of run after the treatment.